NHM Incidents by Minute
This chart shows when WBC Network Health Monitor Incidents occur by device by minute. This is not the same as the incidents used in IntraVUE Analytics.
Understanding NHM Incidents and Events explains how WBC Network Health Monitor creates incidents. Incidents occur when a Ping or Bandwidth response for a device exceeds a value which represents the upper range of expected responses. The importance in WBC Network Health Monitor is the number of devices in a network which exceed their values in the same or consecutive minutes, not what any individual device does.
This chart is good at showing when and which individual devices are exceeding their upper range of responses. The NHM Incidents by Time Over-Range shows the device Total numbers but not which devices, and the NHM Incidents by Device Over-Range show the Total by device over a time duration, but not the individual minutes.
Like most other charts, on the left is a control panel to select how many Hours To Graph, which Critical Types to graph, and which Networks to graph.
You can select graphing for either Ping, XMIT, or RECV incidents as well as how to Sort and label the devices.
The Sort by control offers several sorts:
| Introduction |
|
| Key Features and Benefits |
|
| Getting Started |
|
| Update Intravue |
|
| Notes on User Interface |
|
| Configuration |
|
| Connecting to an IntraVUE |
|
| WBC Network Health Monitor Settings |
|
| Email Settings |
|
| Database Settings |
|
| Real-Time IntraVUE Management |
|
| IntraVUE Status |
|
| IntraVUE Dashboard |
|
| Summary Statistics |
|
| Highest Ping Response Devices |
|
| Highest Bandwidth Devices |
|
| Uptime and Statistics |
|
| Hypertree Network Map |
|
| Tree View Network Map |
|
| Reports |
|
| Device Info |
|
| Alarms and Warnings |
|
| Events |
|
| Threshold Analysis and Configuration Report |
|
| Time Based CRC and IfInErrors Report |
|
| Connection History Report |
|
| 1 Week Disconnected Devices Report |
|
| Disconnections by Minute Chart |
|
| Ping Failures by Minute Chart |
|
| Switchprobe (analysis) Reports |
|
| Utilities |
|
| Device Editor |
|
| KPI Management |
|
| Create a 'clean' database with existing ranges |
|
| Vendor Name Management |
|
| DeviceInfo Popup |
|